1/32 A6M5c Zero – Tail Control Surfaces for Hasega
CMK A6M5c Zero – Tail Control Surfaces for Hasegawa is a 1:32-scale resin kit of tail control surfaces. This set is designed for Hasegawa’s A6M5c Zero plastic model and replaces the rudder and elevators with separate parts that can be positioned individually during assembly.
CMK A6M5c Zero – Tail Control Surfaces for Hasegawa is a 1:32-scale resin kit of tail control surfaces designed for Hasegawa’s A6M5c Zero plastic model. The kit replaces the rudder and elevators with separate parts that can be positioned individually during assembly.
Benefits for the Model
This is a targeted accessory for a specific part of the build, not a universal kit. It helps refine this particular area of the model and highlight details that are clearly visible on the finished model.
Recommended Procedure
- Before separating the parts, compare the resin parts with the assembly instructions and dry-fit them to verify their positions.
- Remove the sprues gradually using a fine-toothed saw or by sanding. When sanding the resin, work with water and avoid inhaling the resulting dust.
- Degrease the parts, let them dry, and glue them together using cyanoacrylate or two-part epoxy adhesive; standard polystyrene glue will not bond the resin.
- Before painting, apply a suitable primer and then proceed with paints corresponding to the chosen reference model.
Note: The basic plastic model kit is not included in the package. For assembly, refer to adhesives suitable for resin, and for finishing, use model paints and primers.
| Category: | Detail Sets |
|---|---|
| Weight: | 0.032 kg |
| EAN: | 8595593124681 |
| Scale: | 1/32 |
| Series: | CMK |
| Typ: | Letadla |
Discussion
Be the first who will post an article to this item!
