1/72 Radiators for PZL 37 Łoś B/B bis (3d printed)
IBG Models 72U028 is a 3D-printed detail set for radiators for the PZL.37 Łoś B/B bis in 1:72 scale. It contains finned radiators with frames and individually defined slats and is designed for IBG Models kits 72514, 72515 and 72516.
1/72 Radiators for PZL 37 Łoś B/B bis (3d printed)
IBG Models 72U028 – radiators for the PZL.37 Łoś B/B bis in 1:72 scale replaces the kit parts with more precisely defined 3D prints. The set contains finned radiators with frames and individually defined slats and is designed for IBG Models kits 72514, 72515 and 72516. Fine fins, mesh and edges remain visible under a thin primer coat.
Set application
- Part: radiators for the PZL.37 Łoś B/B bis
- Scale: 1:72
- Compatibility: IBG Models kits 72514, 72515 and 72516
- Technology: 3D printing
Recommended procedure
- Remove supports gradually with fine cutters and a knife to avoid damaging fins and thin edges.
- Test-fit the part and verify its orientation against the kit instructions.
- Degrease the surface and apply a very thin primer coat that will not fill the radiator texture.
- Emphasise the mesh depth with a thin wash and carefully highlight the edges with dry brushing.
- Fix the parts with a small amount of cyanoacrylate adhesive; polystyrene cement will not bond the 3D print.
Note: the plastic kit is not included.
Use model paints and primers and adhesives suitable for 3D-printed parts to finish the set.
| Category: | Detail Sets |
|---|---|
| Weight: | 0.01 kg |
| EAN: | 5907747902848 |
| Scale: | 1/72 |
Discussion
Be the first who will post an article to this item!
