AK Acrylic auxiliary Products GREEN POWER (Masilla Bicomponente 2 x 10 cm)
AK8208 Greenpower 2 Component Modeling Putty (2 × 10 cm) is a two-component epoxy modeling putty for creating, repairing, and filling parts. Once mixed, it offers approximately 90 minutes of working time and reaches full hardness in 24 hours.
AK8208 Greenpower 2 Component Modeling Putty (2 × 10 cm) is a two-component epoxy putty that can be used to create missing parts, figure details, welds, sails, wiring, and other model elements. After thoroughly mixing both components, a sticky green mass forms with a working time of approximately 90 minutes.
For a smoother surface, the manufacturer recommends moistening or lubricating the tools continuously with water, oil, or petroleum jelly. A thin layer of talcum powder can reduce fingerprints or, conversely, help create texture. Changing the ratio of the components affects both the final hardness and the curing speed.
Recommended Procedure
- Measure out the required amounts of both components and mix them thoroughly until the mixture is an even green color.
- Press the mixture onto a clean surface and shape it with a moistened or greased tool.
- Finish the details within approximately 90 minutes.
- Leave the model undisturbed; the putty will reach its maximum hardness after approximately 24 hours.
Technical Information
- Type: two-component epoxy putty
- Contents: 2 × 10 cm
- Working time: approximately 90 minutes
- Full cure: approximately 24 hours
- Storage: in a cool place; low temperatures extend the shelf life of the unmixed components
| Category: | Putty & Thinners |
|---|---|
| Weight: | 0.02 kg |
| EAN: | 8435568301689 |
Discussion
Be the first who will post an article to this item!
