AK Enamel Air Weathering LANDING GEAR DUST
AK Interactive AK2031 Landing Gear Dust (35 ml) is an enamel modeling effect for simulating dust on tires, wheels, landing gear legs, and in aircraft landing gear bays. Appearance: natural dust accumulation. After application, blend the effect with a clean brush using enamel thinner to create natural transitions and streaks. Volume: 35 ml.
AK Interactive AK2031 Landing Gear Dust (35 ml) Used to create a natural dust effect. It is designed for dust on tires, wheels, landing gear legs, and in aircraft landing gear bays. After application, blend the effect with a clean brush using enamel thinner to create natural transitions and streaks.
Recommended Procedure
- Shake the bottle thoroughly and work on a completely cured surface.
- Apply the product with a brush to tires, wheels, landing gear struts, and areas where dust would naturally accumulate.
- Use a clean brush dampened with White Spirit to blend the effect into natural transitions. Leave some of the deposits in the corners and around details.
- Once dry, apply a second coat in specific areas if you need to emphasize heavily dusty spots.
- Allow the layer to dry thoroughly before applying another coat of paint or another enamel effect.
Use AK Interactive White Spirit 35 ml to blend and remove excess. For finer work and less odor, AK Interactive Odorless Thinner 35 ml is recommended.
Technical Information
- Type: enamel modeling effect
- Appearance: natural dust deposit
- Intended Use: dust on tires, wheels, landing gear legs, and in aircraft landing gear bays
- Application: brush; blend with a clean brush afterward
- Blending and cleaning: White Spirit or Odorless Thinner
- Volume: 35 ml
This is a solvent-based product. Work in a well-ventilated area and follow the safety instructions on the label.
| Category: | Weathering and Patina |
|---|---|
| Weight: | 0.04 kg |
| EAN: | 8436535573245 |
Discussion
Be the first who will post an article to this item!
