AK Glues & Cement FLASH - ACCELERATOR FOR CYANOACRYLATE GLUE / ACTIVADOR DE PEGAMENTO DE CIANOCRILAT
AK12026 Flash CA Glue Accelerator Spray (200 ml) is an aerosol activator that reduces the curing time of cyanoacrylate adhesive from several seconds to almost instantaneous. Volume: 200 ml.
AK12026 Flash CA Glue Accelerator Spray (200 ml) This spray activator is designed to significantly accelerate the curing of cyanoacrylate adhesives. The even aerosol spray helps create a quick and precise bond where it is not possible to hold parts together for long or where immediate fixation is required.
The activator is not a substitute for adhesive. Apply it sparingly, as an excessive amount may affect the appearance of the surrounding surface or cause the adhesive to cure too rapidly.
Recommended Procedure
- Align the parts without adhesive and prepare the CA adhesive.
- Apply a small amount of adhesive to one bonding surface.
- Apply the activator lightly to the other surface or very sparingly to the finished joint.
- Immediately align the parts precisely; curing occurs almost instantly.
A suitable adhesive is, for example, AK12015 Magnet CA Glue. Any dried excess can be carefully removed using AK12017 Eraser.
Use the aerosol only in a well-ventilated area, away from ignition sources, and follow the safety instructions on the packaging.
Technical Information
- Product: AK12026 Flash CA Glue Accelerator Spray (200 ml)
- Contents: 200 ml
| Category: | Glues |
|---|---|
| EAN: | 8435568309142 |
Discussion
Be the first who will post an article to this item!
