ASK CA Glue Thick (husté) for 3D Print 20g
ASK CA Glue Thick for 3D Print (20 g) - ideal for bonding larger 3D printed parts made of PLA, PETG and other materials. Thanks to its thicker consistency, it does not flow, fills joints beautifully and ensures a strong bond.
When you need the glue to stick exactly where you put it, reach for ASK CA Glue Thick for 3D Print 20g.
This thick instant glue is designed specifically for 3D printed parts, where a little extra time for precise seating and the assurance that the glue won't run out where it's not supposed to is useful.
It creates a strong and durable bond on materials such as PLA, PETG and other common 3D printing plastics, and a highIt is ideal for repairs, retrofitting and bonding larger or less precise parts.
Due to its higher viscosity, it fills joints and unevenness beautifully so the joint remains clean and aesthetically smooth.
🧴 Uses:
-
Apply a reasonable amount of adhesive to one surface.
-
Apply a generous amount of adhesive to the parts and hold for 20-30 seconds.
-
For instant cure, use ASK Activator for CA glues.
⚙️ Suitable for materials:
-
PLA, PETG and other common 3D printing materials
-
Wood, metals, ceramics, hard plastics
⚠️ Warning:
Not suitable for polystyrene foam, polyethylene, Teflon and silicone.
Contains substances classified as hazardous under Regulation (EC) No 1272/2008 - work in a well-ventilated area and protect eyes and skin.
Volume: 20 g
Manufacturer.
| Category: | Glues |
|---|---|
| Weight: | 0.015 kg |
| EAN: | 8599260025011 |
Discussion
Be the first who will post an article to this item!
