F-4 "Phantom II" early 600 gallon fuel tanks (all welded) with pylon (1 pcs) (3D Printed) (1/32)
F-4 "Phantom II" early 600-gallon fuel tanks (all welded) with pylon (1 pc) (3D Printed) is a set of weapon pylons or mounts in 1/32 scale from RESKIT. The package contains 1 part. It helps refine the pylons, adapters, and weapon mounts, which determine the final placement of the underwing loads.
F-4 "Phantom II" early 600-gallon fuel tanks (all welded) with pylon (1 pc) (3D Printed) is a set of weapon pylons or mounts in 1/32 scale from RESKIT. The package contains 1 part. It helps refine the pylons, adapters, and weapon mounts that determine the final placement of the underwing loads.
The parts are 3D-printed, so they feature fine detail and require careful separation from the support structures.
This is an add-on set; neither the basic kit nor the model shown in the photo is included in the package.
Recommended Use
- Type: set of weapon mounts or carriers
- Scale: 1/32
- Package contents: 1 part
- Before gluing, test-fit the parts against the model to verify the fit.
- Carefully separate resin or 3D-printed parts using a sharp tool and smooth them with light sanding.
- Use cyanoacrylate adhesive for gluing; we recommend applying a primer before painting.
You will also need model glue, base coats, primers, and model paints to work with this kit.
| Category: | Detail Sets |
|---|---|
| EAN: | 4824593201134 |
| Scale: | 1/32 |
| Accessory type: | Bombs, rockets & armament, Drop tanks |
Discussion
Be the first who will post an article to this item!
