Hobby 2000 80014 Masking Tape For Curves 2,5mm x 18m

Brand: Hobby 2000

Hobby 2000 80014 Masking Tape For Curves 2.5 mm x 18 m is a flexible blue masking tape 2.5 mm wide and 18 m long. It is designed for curves, curved lines, and multicolored camouflage when working with a brush or airbrush.

Availability In stock (4 pcs)
Delivery to:
21.10.2026
Delivery options
Code: 159-H2K80014
Hobby 2000 80014 Masking Tape For Curves 2,5mm x 18m
Brand: Hobby 2000

Hobby 2000 80014 Masking Tape for Curves 2.5 mm x 18 m is a flexible modeling masking tape made of blue film. The narrow 2.5 mm width conforms well to curves and curved surfaces, where standard paper tape easily creases. The tight-fitting edge helps minimize paint bleed and create a clean transition.

What it’s good for

  • curved camouflage lines, colored stripes, and rounded transitions
  • masking aircraft fuselages, vehicle fronts, fuel tanks, wheel rims, and other rounded parts
  • use with both a brush and an airbrush

Recommended Procedure

  1. Clean the surface and allow the primer to cure completely.
  2. Run the tape along the desired curve without pulling it too tightly, and press it down continuously, especially along the painted edge.
  3. Apply the paint in several thin layers. When spraying, direct the spray perpendicular to the surface or away from the edge of the mask.
  4. Remove the tape slowly at a low angle. On pigmented surfaces, first test adhesion in a less visible area.

Technical Specifications

  • Type: flexible masking tape for curves
  • Width: 2.5 mm
  • Length: 18 m
  • Material: flexible blue film

For further work, you can use masks and masking tools, airbrush equipment, and model paints.

Category: Masks
EAN: 5903002058930

Discussion

Be the first who will post an article to this item!

Do not fill out this field

By submitting a comment, you agree to the Privacy Policy.

Alternative products

103 CX157

EDUARD Ki-43 I Oscar 1/72 recommended for FUJIMI is a 1/72 scale masking template designed for the FUJIMI kit.

Code: 103-CX157
103 EX792

EDUARD Lancaster B Mk.I 1/48 recommended for HKM is a 1/48 scale masking template designed for the HKM kit.

Code: 103-EX792
103 CX610

EDUARD F4F-4 1/72 recommended for ARMA HOBBY is a 1/72 scale camouflage stencil designed for the ARMA HOBBY kit.

Code: 103-CX610
100 M72052

This set of 1/72nd scale camouflage stencils for Westland Whirlwind Mk.I by Special Hobby allows you to accurately mask the cockpit and other...

Code: 100-M72052
103 CX706

EDUARD F-104J 1/72 recommended for FINE MOLDS is a 1/72 scale masking template designed for the FINE MOLDS kit.

Code: 103-CX706
103 CX182

EDUARD F4U-1A 1/72 recommended for TAMIYA is a 1/72 scale masking template designed for TAMIYA model kits.

Code: 103-CX182
103 EX224

EDUARD A-10 1/48 recommended for HOBBY BOSS is a 1/48 scale masking template designed for the HOBBY BOSS kit.

Code: 103-EX224
103 EX352

EDUARD PV-1 1/48 recommended for REVELL is a 1/48 scale masking template designed for the REVELL kit.

Code: 103-EX352