I/35 M72 LAW

Firma49 A003 is a set of six disposable M72 LAW anti-tank rocket launchers in 1/35 scale. Three are shown closed for transport and three in the open firing configuration. The set equips figures, a vehicle or a supply point with two distinct states of the same weapon. The resin parts are produced by high-resolution SLA 3D printing.

Set contents

• 3 × M72 LAW closed for transport
• 3 × M72 LAW in the open firing configuration

• Scale: 1/35
• Material and technology: resin, high-resolution SLA 3D printing

Recommended procedure

1. Soak the parts in hot water before removing supports. The resin softens slightly, reducing the risk of chipping during cutting or drilling, and regains its hardness after cooling.
2. Remove supports in small sections with fine cutters and clean the contact points carefully to protect thin edges and small details.
3. Degrease the parts, allow them to dry and apply a thin primer coat. Check colours and placement against period photographs or references for the intended scene.
4. Bond the resin parts with a small amount of cyanoacrylate adhesive. Polystyrene cement will not join them.

The set contains only the resin accessories listed; figures, vehicle, weapons beyond the stated contents and display base are not included.

Use suitable model paints and primers and cyanoacrylate adhesives for assembly and finishing.