I/35 Vintage gas station ver. A

Firma49 C057 is a seven-part early 20th-century fuel dispenser kit in 1/35 scale. Clear-resin joined containers and a separate tin-wire hose create a convincing period filling station, garage or street scene. The resin parts are produced by high-resolution SLA 3D printing.

Set contents

• 1 × main stand
• 2 × doors
• 1 × joined clear-resin container unit
• 1 × tin-wire hose
• 1 × pump handle
• 1 × hose nozzle

• Scale: 1/35
• Material and technology: resin, high-resolution SLA 3D printing

Recommended procedure

1. Soak resin parts in hot water before removing supports. The material softens slightly, reducing the risk of chipping, and regains its hardness after cooling.
2. Remove supports in small sections with fine cutters and clean contact points carefully. Handle clear parts and the metal wire in the fuel dispenser set separately.
3. Degrease the parts, let them dry and apply a thin primer coat. Distinguish wood, metal, fabrics and wear according to the chosen scene.
4. Bond resin parts with a small amount of cyanoacrylate adhesive. Test functional or moving joints dry before gluing.

Figures, vehicles, building and display base are not included.

Use suitable model paints and primers and cyanoacrylate adhesives for assembly and finishing.