Hobby 2000 80024 Masking Tape For Curves 0,75mm x 18m

Brand: Hobby 2000

Hobby 2000 80024 Masking Tape For Curves 0.75 mm x 18 m is a flexible blue masking tape 0.75 mm wide and 18 m long. It is designed for curves, curved lines, and multicolored camouflage when working with a brush or airbrush.

Availability In stock (5 pcs)
Delivery to:
08.09.2026
Delivery options
Code: 159-H2K80024
Hobby 2000 80024 Masking Tape For Curves 0,75mm x 18m
Brand: Hobby 2000

Hobby 2000 80024 Masking Tape for Curves 0.75 mm x 18 m is a flexible modeling masking tape made of blue film. The narrow 0.75 mm width conforms well to curves and curved surfaces, where standard paper tape easily creases. The tight-fitting edge helps minimize paint overspray and create a clean transition.

What it’s good for

  • curved camouflage lines, colored stripes, and rounded transitions
  • masking aircraft fuselages, vehicle fronts, fuel tanks, wheel rims, and other rounded parts
  • use with both a brush and an airbrush

Recommended Procedure

  1. Clean the surface and allow the primer to cure completely.
  2. Run the tape along the desired curve without pulling it too tightly, and press it down continuously, especially along the painted edge.
  3. Apply the paint in several thin layers. When spraying, direct the spray perpendicular to the surface or away from the edge of the mask.
  4. Remove the tape slowly at a low angle. On pigmented surfaces, first test adhesion in a less visible area.

Technical Specifications

  • Type: flexible masking tape for curves
  • Width: 0.75 mm
  • Length: 18 m
  • Material: flexible blue film

For further work, you can use masks and masking tools, airbrush equipment, and model paints.

Category: Masks
EAN: 5903002059050

Discussion

Be the first who will post an article to this item!

Do not fill out this field:

By submitting a comment, you agree to the Privacy Policy.

Alternative products

103 EX699

EDUARD He 111Z TFace 1/48 recommended for ICM is a 1/48 scale masking template designed for the ICM kit.

Code: 103-EX699
103 EX730

EDUARD F-14A TFace 1/48 recommended for TAMIYA is a 1/48 scale masking template designed for TAMIYA model kits.

Code: 103-EX730
103 CX560

EDUARD Yak-1b 1/72 recommended for ARMA HOBBY is a 1/72 scale camouflage stencil designed for the ARMA HOBBY kit.

Code: 103-CX560
59678 30002 142 rsm32 0009
€6,60 (–24 %)

MiG-29UB Pre-cut Painting Masks for Trumpeter Kit is a pre-cut masking set in 1/32 scale from RESKIT. The set is designed for the Trumpeter kit. It...

Code: 142-RSM32-0009
176 MIR 48014

Miryoku surface panel masks for theKawasaki Ki-61-Id Hien are painting masks for the Tamiya Kawasaki Ki-61-Id Hien model kit in 1:48 scale. The...

Code: 176-MIR-48014
103 JX262

EDUARD PT-17 / N2S-3 1/32 recommended for ICM is a 1/32 scale masking template designed for the ICM kit.

Code: 103-JX262
103 CX594

EDUARD Nieuport Ni-17 Weekend 1/72 recommended for EDUARD is a 1/72 scale masking template designed for the EDUARD kit.

Code: 103-CX594
103 JX253

Eduard Bf 108 TFace 1/32 is a pre-cut TFace masking set for the exterior and interior of the cockpit for the EDUARD model kit. Manufacturer's...

Code: 103-JX253