AK Enamel effects LIGHT FILTER FOR WOOD
AK Interactive AK261 Ochre for Sand / Light Filter for Wood (35 ml) is an enamel modeling filter for sandy shades and light wood parts. Shade: ochre. It subtly alters sandy base colors, adding depth to them, and also works well on parts imitating light wood. Volume: 35 ml.
AK Interactive AK261 Ochre for Sand / Light Filter for Wood (35 ml) is a translucent enamel filter designed to subtly alter the base color tone. This specific variant is designed for sandy shades and light-colored wood parts. It subtly alters sandy base colors, adding depth to them, and also works well on parts designed to imitate light wood.
This filter is not a wash. A wash concentrates in seams and recesses, while a filter is applied in minimal quantities over a larger area. It helps break up the monotony of a single-color camouflage, harmonize multiple shades, or color-code selected panels without obscuring the base or fine details.
Recommended Procedure
- Shake the bottle thoroughly. The surface must be completely dry, painted, and varnished; the manufacturer particularly recommends a satin finish.
- Simply dampen a flat, soft brush with the filter. The brush should not be so saturated that the product drips from it.
- Spread the filter into a very thin, even layer without puddles or flooding the details. Blend the strokes smoothly so that no sharp patches form after drying.
- To achieve a uniform overall look, cover the entire surface; for color variation, work only on selected panels or areas.
- Let the layer dry completely before assessing the final tone. Build up the intensity with additional thin layers, not a single thick application.
Practical tip: On wood, apply the filter in the direction of the grain; on sand camouflage, use it as a translucent full-surface layer.
The filter can be thinned, adjusted, or removed using AK Interactive White Spirit 35 ml. For finer work, AK Interactive Odorless Thinner 35 ml is recommended.
Technical Information
- Type: translucent, solvent-based enamel filter
- Shade: ochre
- Intended Use: sand-colored shades and light-colored wooden parts
- Application: flat, soft brush; apply a very thin layer without saturating the surface
- Recommended substrate: completely dry painted surface, preferably satin finish
- Thinning and preparation: White Spirit or Odorless Thinner
- Volume: 35 ml
This is a solvent-based product. Work in a well-ventilated area, keep the container tightly closed, and follow the safety instructions on the label.
| Category: | Weathering and Patina |
|---|---|
| Weight: | 0.04 kg |
| EAN: | 8436535572613 |
Discussion
Be the first who will post an article to this item!
