Hobby 2000 80018 Masking Tape For Curves 4,5mm x 18m

Brand: Hobby 2000

Hobby 2000 80018 Masking Tape For Curves 4.5 mm x 18 m is a flexible blue masking tape 4.5 mm wide and 18 m long. It is designed for curves, curved lines, and multicolored camouflage when working with a brush or airbrush.

Availability In stock (5 pcs)
Delivery to:
08.09.2026
Delivery options
Code: 159-H2K80018
Hobby 2000 80018 Masking Tape For Curves 4,5mm x 18m
Brand: Hobby 2000

Hobby 2000 80018 Masking Tape for Curves 4.5 mm x 18 m is a flexible modeling masking tape made of blue film. The narrow 4.5 mm width conforms well to curves and curved surfaces, where standard paper tape easily creases. The tight-fitting edge helps minimize paint bleed and create a clean transition.

What it’s good for

  • curved camouflage lines, colored stripes, and rounded transitions
  • masking aircraft fuselages, vehicle fronts, fuel tanks, wheel rims, and other rounded parts
  • use with both a brush and an airbrush

Recommended Procedure

  1. Clean the surface and allow the primer to cure completely.
  2. Run the tape along the desired curve without pulling it too tightly, and press it down continuously, especially along the painted edge.
  3. Apply the paint in several thin layers. When spraying, aim the spray stream perpendicular to the surface or away from the edge of the mask.
  4. Remove the tape slowly at a low angle. On pigmented surfaces, first test adhesion in a less visible area.

Technical Specifications

  • Type: flexible masking tape for curves
  • Width: 4.5 mm
  • Length: 18 m
  • Material: flexible blue film

For further work, you can use masks and masking tools, airbrush equipment, and model paints.

Category: Masks
EAN: 5903002058978

Discussion

Be the first who will post an article to this item!

Do not fill out this field:

By submitting a comment, you agree to the Privacy Policy.

Alternative products

103 CX369

EDUARD Ju 88C-6 1/72 recommended for REVELL is a 1/72 scale masking template designed for the REVELL kit.

Code: 103-CX369
103 CX538

EDUARD Phantom FGR.2 1/72 recommended for AIRFIX is a 1/72 scale masking template designed for the AIRFIX kit.

Code: 103-CX538
103 JX267

EDUARD F-100F 1/32 recommended for TRUMPETER is a 1/32 scale masking template designed for the TRUMPETER kit.

Code: 103-JX267
103 JX253

Eduard Bf 108 TFace 1/32 is a pre-cut TFace masking set for the exterior and interior of the cockpit for the EDUARD model kit. Manufacturer's...

Code: 103-JX253
180 A.MIG 8240

Softouch Velvet Masking Tape #1 (2 mm x 25 m) is an AMMO masking aid for precisely separating colored areas and camouflage patterns, and for...

Code: 180-A.MIG-8240
103 EX699

EDUARD He 111Z TFace 1/48 recommended for ICM is a 1/48 scale masking template designed for the ICM kit.

Code: 103-EX699
103 EX974

EDUARD Yak-9T 1/48 recommended for ZVEZDA is a 1/48 scale masking template designed for the ZVEZDA kit.

Code: 103-EX974
103 JX256

EDUARD A-26B Invader 1/32 recommended for HOBBY BOSS is a 1/32 scale masking template designed for the HOBBY BOSS kit.

Code: 103-JX256