Hobby 2000 80019 Masking Tape For Curves 5mm x 18m

Brand: Hobby 2000

Hobby 2000 80019 Masking Tape For Curves 5mm x 18m is a flexible blue masking tape that is 5 mm wide and 18 m long. It is designed for curves, curved lines, and multicolored camouflage when working with a brush or airbrush.

Availability In stock (>5 pcs)
Delivery to:
21.10.2026
Delivery options
Code: 159-H2K80019
Hobby 2000 80019 Masking Tape For Curves 5mm x 18m
Brand: Hobby 2000

Hobby 2000 80019 Masking Tape for Curves 5 mm x 18 m is a flexible modeling masking tape made of blue film. The narrow 5 mm width conforms well to curves and curved surfaces, where standard paper tape easily creases. The tight-fitting edge helps minimize paint bleed and create a clean transition.

What it’s good for

  • curved camouflage lines, colored stripes, and rounded transitions
  • masking aircraft fuselages, vehicle fronts, fuel tanks, wheel rims, and other rounded parts
  • use with both a brush and an airbrush

Recommended Procedure

  1. Clean the surface and allow the primer to cure completely.
  2. Run the tape along the desired curve without pulling it too tightly, and press it down continuously, especially along the painted edge.
  3. Apply the paint in several thin layers. When spraying, direct the spray perpendicular to the surface or away from the edge of the mask.
  4. Remove the tape slowly at a low angle. On pigmented surfaces, first test adhesion in a less visible area.

Technical Specifications

  • Type: flexible masking tape for curves
  • Width: 5 mm
  • Length: 18 m
  • Material: flexible blue film

For further work, you can use masks and masking tools, airbrush equipment, and model paints.

Category: Masks
EAN: 5903002058985

Discussion

Be the first who will post an article to this item!

Do not fill out this field

By submitting a comment, you agree to the Privacy Policy.

Alternative products

103 EX792

EDUARD Lancaster B Mk.I 1/48 recommended for HKM is a 1/48 scale masking template designed for the HKM kit.

Code: 103-EX792
103 EX1175

EDUARD Hampden TB Mk.I Torpedo Bomber 1/48 Recommended for ICM is a 1/48 scale masking template designed for the ICM kit.

Code: 103-EX1175
103 JX230

EDUARD B-24 1/32 recommended for HOBBY BOSS is a 1/32 scale masking template designed for the HOBBY BOSS kit.

Code: 103-JX230
103 EX1177

Eduard masks EX1177 for Fw 190D-9 in 1/48 scale are designed for MINIART kit. Includes precision masks for cockpit and wheels. They facilitate...

Code: 103-EX1177
103 JX242 Code: 103-JX242
103 CX610

EDUARD F4F-4 1/72 recommended for ARMA HOBBY is a 1/72 scale camouflage stencil designed for the ARMA HOBBY kit.

Code: 103-CX610
103 CX609

EDUARD Mirage III CJ 1/72 recommended for MODELSVIT is a 1/72 scale masking template designed for the MODELSVIT kit.

Code: 103-CX609
103 EX1144

EDUARD P-47D Razorback TFace 1/48 recommended for MINIART is a 1/48 scale masking template designed for the MINIART kit.

Code: 103-EX1144