I/35 Cooker

Firma49 C013 is a stove kit with a complete flue in 1/35 scale. Four legs, one straight flue section and two elbows allow the stove to fit a barracks, workshop, office, living room or field building interior. The resin parts are produced by high-resolution SLA 3D printing.

Set contents

• 1 × stove body
• 4 × leg
• 1 × straight flue section
• 2 × flue elbow

• Scale: 1/35
• Material and technology: resin, high-resolution SLA 3D printing

Recommended procedure

1. Soak resin parts in hot water before removing supports. The material softens slightly, reducing the risk of chipping, and regains its hardness after cooling.
2. Remove supports in small sections with fine cutters and clean contact points carefully. Handle clear parts and the metal wire in the fuel dispenser set separately.
3. Degrease the parts, let them dry and apply a thin primer coat. Distinguish wood, metal, fabrics and wear according to the chosen scene.
4. Bond resin parts with a small amount of cyanoacrylate adhesive. Test functional or moving joints dry before gluing.

Figures, vehicles, building and display base are not included.

Use suitable model paints and primers and cyanoacrylate adhesives for assembly and finishing.