Hobby 2000 80019 Masking Tape For Curves 5mm x 18m

Brand: Hobby 2000

Hobby 2000 80019 Masking Tape For Curves 5mm x 18m is a flexible blue masking tape that is 5 mm wide and 18 m long. It is designed for curves, curved lines, and multicolored camouflage when working with a brush or airbrush.

Availability In stock (>5 pcs)
Delivery to:
09.09.2026
Delivery options
Code: 159-H2K80019
Hobby 2000 80019 Masking Tape For Curves 5mm x 18m
Brand: Hobby 2000

Hobby 2000 80019 Masking Tape for Curves 5 mm x 18 m is a flexible modeling masking tape made of blue film. The narrow 5 mm width conforms well to curves and curved surfaces, where standard paper tape easily creases. The tight-fitting edge helps minimize paint bleed and create a clean transition.

What it’s good for

  • curved camouflage lines, colored stripes, and rounded transitions
  • masking aircraft fuselages, vehicle fronts, fuel tanks, wheel rims, and other rounded parts
  • use with both a brush and an airbrush

Recommended Procedure

  1. Clean the surface and allow the primer to cure completely.
  2. Run the tape along the desired curve without pulling it too tightly, and press it down continuously, especially along the painted edge.
  3. Apply the paint in several thin layers. When spraying, direct the spray perpendicular to the surface or away from the edge of the mask.
  4. Remove the tape slowly at a low angle. On pigmented surfaces, first test adhesion in a less visible area.

Technical Specifications

  • Type: flexible masking tape for curves
  • Width: 5 mm
  • Length: 18 m
  • Material: flexible blue film

For further work, you can use masks and masking tools, airbrush equipment, and model paints.

Category: Masks
EAN: 5903002058985

Discussion

Be the first who will post an article to this item!

Do not fill out this field:

By submitting a comment, you agree to the Privacy Policy.

Alternative products

103 CX637

EDUARD AJ-1 1/72 recommended for RODEN is a 1/72 scale masking template designed for the RODEN kit.

Code: 103-CX637
103 EX883

EDUARD P-38J 1/48 recommended for TAMIYA is a 1/48 scale masking template designed for TAMIYA model kits.

Code: 103-EX883
103 CX626

EDUARD Ki-84 1/72 recommended for ARMA HOBBY is a 1/72 scale camouflage stencil designed for the ARMA HOBBY kit.

Code: 103-CX626
103 XT166

EDUARD BT-7 wheel masks 1/35 recommended for TAMIYA is a 1/35 scale masking template designed for TAMIYA model kits.

Code: 103-XT166
103 EX950

EDUARD F-4E TFace 1/48 recommended for MENG is a 1/48 scale masking template designed for the MENG kit.

Code: 103-EX950
103 EX854

EDUARD EA-18G 1/48 recommended for HOBBY BOSS is a 1/48 scale masking template designed for the HOBBY BOSS kit.

Code: 103-EX854
103 EX819

EDUARD TBF-1C 1/48 recommended for ACADEMY is a 1/48 scale masking template designed for the ACADEMY kit.

Code: 103-EX819
103 EX840

EDUARD F/A-18F 1/48 recommended for MENG is a 1/48 scale masking template designed for the MENG kit.

Code: 103-EX840