1/48 engraved plate-LENTIL type PE engr plates (total dimensions 100x50mm)
1/48 engraved plate-LENTIL type PE engr plates (total dimensions 100x50mm) is a Hauler combined resin and photo-etched set for engraved plate-LENTIL type in 1/48 scale. Suitable for more precise building, detail work or realistic diorama scenes.
1/48 engraved plate-LENTIL type PE engr plates (total dimensions 100x50mm)
1/48 engraved plate-LENTIL type PE engr plates (total dimensions 100x50mm) is a Hauler combined resin and photo-etched set intended for engraved plate-LENTIL type in 1/48 scale.
The resin and photo-etched combination adds both three-dimensional and very fine flat details to the kit. Clean resin parts before gluing and shape photo-etched parts only after test-fitting.
Recommended use
- Type: combined resin and photo-etched set
- Scale: 1/48
- Subject / use: engraved plate-LENTIL type
- Material: resin / photo-etched parts depending on the set
- Compatibility: check against the kit and scale
- Test-fit the part before gluing and compare it with the kit instructions.
- Separate resin with a fine saw and shape photo-etched parts with tweezers or a bending tool.
- Use CA glue for resin and metal; primer is recommended before painting.
| Category: | Detail Sets |
|---|---|
| Weight: | 0.015 kg |
| EAN: | 8599250007645 |
| Scale: | 1/48 |
Discussion
Be the first who will post an article to this item!
