1/72 IAR.80/81 Pilot's seat with seatbelts (June 1941 - mid-1943)
IBG Models 72U052 is a 3D-printed interior set with a pilot's seat with seatbelts for the I.A.R. 80/81 in 1:72 scale. This is the version used from June 1941 to mid-1943. It is designed for the corresponding IBG Models I.A.R. 80/81 kits and reproduces the frames, seat surfaces and belts of the specified version.
IBG Models 72U052 – a pilot's seat with seatbelts for the I.A.R. 80/81 in 1:72 scale is a 3D-printed replacement for the kit interior parts. The set reproduces the seat frames, upholstery, fittings and belts. This is the version used from June 1941 to mid-1943. It is designed for the corresponding IBG Models I.A.R. 80/81 kits.
Contents and application
- Aircraft: I.A.R. 80/81
- Scale: 1:72
- Contents: a pilot's seat with seatbelts
- Period: version used from June 1941 to mid-1943
- Compatibility: the corresponding IBG Models I.A.R. 80/81 kits
- Technology: 3D printing
Recommended procedure
- Check the position of the seats, frames and controls against the kit instructions before removing the parts.
- Remove printing supports gradually with fine cutters or a sharp knife; do not lever against the belts or thin frames.
- Test-fit the parts inside the fuselage and adjust contact surfaces only in small steps.
- Degrease and prime the surface, then paint the seat surfaces, metal frames, belts and buckles separately.
- Fix the assembly with a small amount of cyanoacrylate adhesive; polystyrene cement will not bond the 3D-printed material.
Note: the plastic kit is not included.
Use model paints and primers and adhesives suitable for 3D-printed parts to finish the model.
| Category: | Detail Sets |
|---|---|
| EAN: | 5907747903456 |
| Scale: | 1/72 |
Discussion
Be the first who will post an article to this item!
