AK Enamel effects NEUTRAL GREY FILTER
AK Interactive AK4161 Neutral Grey Filter (35 ml) is an enamel modeling filter for very light and white surfaces. Shade: neutral gray. It is designed for winter military vehicles, spacecraft, light-colored aircraft, UN vehicles, and other white or very light surfaces, to which it adds a subtle depth. Volume: 35 ml.
AK Interactive AK4161 Neutral Grey Filter (35 ml) is a translucent enamel filter designed to subtly alter the base color tone. This specific variant is designed for very light and white surfaces. It is intended for winter vehicles, spacecraft, light-colored aircraft, UN vehicles, and other white or very light surfaces, to which it adds a subtle depth.
This filter is not a wash. A wash concentrates in seams and recesses, while a filter is applied in minimal quantities over a larger area. It helps break up the monotony of single-color camouflage, harmonize multiple shades, or color-code selected panels without obscuring the base coat or fine details.
Recommended Procedure
- Shake the bottle thoroughly. The surface must be completely dry, painted, and varnished; the manufacturer particularly recommends a satin finish.
- Simply dampen a flat, soft brush with the filter. The brush should not be so saturated that the product drips from it.
- Spread the filter into a very thin, even layer without puddles or flooding the details. Blend the strokes smoothly so that no sharp patches form after drying.
- To achieve a uniform overall look, cover the entire surface; for color variation, work only on selected panels or areas.
- Let the layer dry completely before assessing the final shade. Build up the intensity with additional thin layers, not a single thick application.
Practical tip: On white paint, even a small amount can cause a noticeable change in tone; therefore, test the filter first on a less conspicuous area.
The filter can be thinned, adjusted, or removed using AK Interactive White Spirit 35 ml. For finer work, AK Interactive Odorless Thinner 35 ml is recommended.
Technical Information
- Type: translucent, solvent-based enamel filter
- Shade: neutral gray
- Intended Use: very light and white surfaces
- Application: flat, soft brush; apply a very thin layer without saturating the surface
- Recommended substrate: completely dry painted surface, preferably satin finish
- Thinning and preparation: White Spirit or Odorless Thinner
- Volume: 35 ml
This is a solvent-based product. Work in a well-ventilated area, keep the container tightly closed, and follow the safety instructions on the label.
| Category: | Weathering and Patina |
|---|---|
| Weight: | 0.04 kg |
| EAN: | 8436535575843 |
Discussion
Be the first who will post an article to this item!
