AK Paneliner FRESH RUST 30ml

AK Interactive AK12105 Fresh Rust Precision Panel Liner (30 ml) is a ready-to-use enamel panel liner. Its thin formula reduces the surface tension typical of acrylic products, allowing the product to effectively flow along engraved lines and around details without unnecessarily coloring large areas when applied correctly.

The new 30-ml package features a long, fine brush with a sparse bristle count built into the cap. It holds enough product for a continuous line, but its sharp tip allows you to precisely place a drop into panel lines, around rivets, or into recesses. The Panel Liner can thus be applied directly from the bottle; the separate brush is mainly useful for corrections and cleaning.

Shade selection: The light rust-colored liner is suitable for fresher rust in lines, joints, around screws, and in details of weathered metal. Use the rusty shade sparingly and irregularly; on a real surface, rust is not uniform across all joints.

Recommended procedure

1. Shake the bottle thoroughly to ensure the pigment is evenly mixed.
2. Work on a fully cured, painted surface. A smooth satin or glossy finish will facilitate capillary flow and the subsequent removal of excess product. For unknown combinations of paints and finishes, test on a hidden area first.
3. Touch the tip of the built-in brush to the start of a panel line or recess. Allow the product to rise, and add another small amount as needed; do not saturate the area.
4. After a short flash-drying period, remove the excess with a clean brush or cotton swab lightly moistened with White Spirit or an odorless thinner. Move across the line to avoid pulling the product out of the joint.
5. Allow the enamel layer to dry thoroughly before applying another coat of paint or additional effects.

For corrections, use AK Interactive White Spirit 35 ml. For finer work and less odor, AK Interactive Odorless Thinner 35 ml is recommended.

Technical Information

• Type: Enamel panel liner
• Shade: light rust
• Usage: engraved panel lines, seams, rivets, and recessed details
• Application: built-in precision brush in the cap
• Finishing and Cleaning: White Spirit or Odorless Thinner
• Volume: 30 ml

This is a solvent-based product. Work in a well-ventilated area and follow the safety instructions on the label.