AK Paneliner LIGHT GREY 30ml

AK Interactive AK12101 Light Grey Precision Panel Liner (30 ml) is a ready-to-use enamel panel liner. Its thin formula reduces the surface tension typical of acrylic products, allowing the product to effectively flow along engraved lines and around details without unnecessarily coloring large areas when applied correctly.

The new 30-ml package features a long, fine brush with a small number of bristles in the cap. It holds enough product for a continuous line, but its sharp tip allows you to precisely place a drop into panel lines, around rivets, or into recesses. The panel liner can thus be applied directly from the bottle; the separate brush is mainly useful for corrections and cleaning.

Shade selection: The light gray liner is suitable for darker and medium-dark surfaces where a black line would create too harsh a contrast. On a dark background, the light gray shade helps separate panels without giving the impression of black lines.

Recommended Procedure

1. Shake the bottle thoroughly to ensure the pigment is evenly mixed.
2. Work on a fully cured, painted surface. A smooth satin or glossy finish will facilitate capillary flow and the subsequent removal of excess product. For unfamiliar combinations of paints and finishes, test the product first on an inconspicuous area.
3. Touch the tip of the integrated brush to the start of a panel line or recess. Allow the product to rise, and add another small amount as needed; do not saturate the surface.
4. After a short flash-drying period, remove the excess with a clean brush or cotton swab lightly moistened with White Spirit or an odorless thinner. Move across the line to avoid pulling the product out of the joint.
5. Allow the enamel layer to dry thoroughly before applying another coat of paint or additional effects.

For corrections, use AK Interactive White Spirit 35 ml. For finer work and less odor, AK Interactive Odorless Thinner 35 ml is recommended.

Technical Information

• Type: Enamel Panel Liner
• Shade: light gray
• Usage: engraved panel lines, seams, rivets, and recessed details
• Application: built-in precision brush in the cap
• Preparation and Cleaning: White Spirit or Odorless Thinner
• Volume: 30 ml

This is a solvent-based product. Work in a well-ventilated area and follow the safety instructions on the label.