1/72 A-10A ejection seat ACES II with seat belts, rec. for GWH

1/72 A-10A Thunderbolt - ACES II Ejection Seats 1/72 with seat belts, rec. for GWH kit, ASK no. 200-A72048

A Masterpiece for A-10A by GWH kit: 1/72 Seats (Cat. No. 200-A72048)

The Ultimate Cockpit Upgrade for your A-10A Thunderbolt.

Take your 1/72 A-10A from Great Wall Hobby to a professional level with our premium ACES II Ejection Seat set. The large canopy makes the cockpit the focal point of the model—make sure it stands out.

• Masterful 3D Engineering: Every specific detail of the ACES II seat has been meticulously captured in our 3D construction to ensure a seamless fit into the G.W.H. kit cockpit.

• Next-Gen 3D Printing: We use ultra-high-resolution 3D printing technology that surpasses traditional resin casting. The result is a perfectly smooth surface with razor-sharp details—completely free of layer lines.

The ejection seat is a highly visible detail of any kit. Our 3D-printed set provides a high level of depth and detail, including realistic fabric textures, harnesses, and more, which will completely transform the model and elevate it into a whole different league of modeling.

ACES II Ejection Seat Painting Guide

1. Priming & Base Coat (Main Frame)

The main structure of the ACES II seat is painted in a semi-gloss or matte dark gull gray.

• Main Frame: FS 36231 (Dark Gull Gray)

  • Tamiya: XF-54 (Dark Sea Grey) or a mix of XF-19 + XF-2 + a drop of XF-54

  • Mr. Hobby: H317 (Aqueous) / C317 (Mr. Color)

  • Vallejo: 71.277 (Dark Gull Gray)

• Launch Rails / Back Elements: Often a slightly darker metallic or dark gray.

  • Tamiya: XF-56 (Metallic Grey) or XF-63 (German Grey)

2. Cushions & Fabric Parts

The survival pack and cushions vary slightly by era and aircraft, but the standard configuration is an olive drab/khaki green backrest and a dark green or black/sheepskin seat cushion.

• Backrest Cushion (Olive Drab / Khaki Green):

  • Tamiya: XF-62 (Olive Drab) or XF-49 (Khaki)

  • Mr. Hobby: H78 / C38 (Olive Drab)

  • Vallejo: 71.016 (US Dark Green)

• Seat Cushion (Dark Green / Sage Green):

  • Tamiya: XF-13 (JA Green) or XF-58 (Olive Green)

  • Mr. Hobby: H302 / C302 (Green FS 34092)

3. Belts and Harnesses

The restraint harnesses on the ACES II are typically a light tan, light gray, or olive green fabric with silver hardware.

• Harness Straps (Light Gray / Tan):

  • Tamiya: XF-19 (Sky Grey) or XF-55 (Deck Tan)

  • Mr. Hobby: H325 / C325 (Gray FS 26440)

  • Vallejo: 71.296 (Light Gray)

• Buckles & Hardware (Bright Silver):

  • Tamiya: X-11 (Chrome Silver)

  • Mr. Hobby: MC211 (Mr. Metal Color Chrome Silver)

  • Vallejo: 71.063 (Silver)

4. Details, Knobs & Ejection Handles

This is what makes the seat "pop" in the cockpit. Use a fine detail brush (0/0 or 000).

• Ejection Pull Handle (Yellow & Black Stripes):

  • Base coat in flat white first, then paint Flat Yellow (Tamiya XF-3 / Mr. Hobby H4). Use a very fine brush or a black fine-liner pen to paint the Flat Black (Tamiya XF-1) stripes.

• Emergency Oxygen Ring (Right Side):

  • Flat Green (Tamiya XF-5 / Mr. Hobby H6).

• Survival Kit Deployment Handle (Left Side):

  • Flat White (Tamiya XF-2) or bright Flat Red (Tamiya XF-7 / Mr. Hobby H3).

Weathering Steps for Realism

1. Gloss Coat: Spray a clear gloss coat (Tamiya X-22 or Mr. Hobby GX100) to protect the base paint and prepare for washing.

2. Pin Wash: Apply a dark brown or black enamel wash (Ammo by Mig - PLW Deep Brown or Tamiya Panel Line Accent Color Black/Brown) into the recesses around the cushions, rivets, and harnesses. Clean up the excess with an odorless enamel thinner.

3. Matte Coat: Spray a flat clear coat (Tamiya XF-86 or Mr. Hobby H20) to remove the gloss sheen and give the fabric parts a realistic texture.

4. Dry Brushing: Lightly dry-brush the edges of the gray metal frame with a lighter gray (Tamiya XF-19) or a silver pencil to simulate worn paint and bare metal friction.

Why choose ASK Distribution products for your project?

Modeling is all about the details, and at ASK, we deliver them in their purest form. Here is why your Mustang deserves more than just out-of-the-box parts:

• Technological Edge: Our 3D construction is refined down to the last rivet and buckle. No air bubbles, no mold shifts—just crisp, razor-sharp detail straight from the printer.

• A Complete Ecosystem: The seat is just the beginning. We offer a comprehensive range of upgrades for the A-10A – essential components to elevate your build to a professional level.

• Unbeatable Pre-cut Masks: Our masks for clear parts are designed for a perfect fit, saving you time and eliminating the risk of scratching the canopy during manual cutting.

• In-house Digital Decals: We are among the few who print their own decals using high-end digital technology. This allows for extreme resolution, vibrant colors, and perfect registration even on the most complex markings.

Made by ASK Distribution s.r.o. – this is more than just a brand; it’s a signature of quality, driven by our passion for the craft. Turn your A-10A into a showstopper that stands out in any collection.